This pre-wired easy to install power extension kit is intended for use in conjunction with our range of garden power kits. Also can be used on it's own to get power to green houses,sheds and outbuildings. Supplied with cable cleats,screws,wall plugs and underground warning tape (used if buried)

P&P Delivery Charge: £5.00 (£6.00 inc. VAT)

AVAILABILITY: immediate delivery

DESCRIPTION:

The product consists of one surface mounted weatherproof enclosure,
dimensions 100x100x50mm, manufactured from self-extinguishing,light-grey thermoplastic, which is highly resistant to impact,heat,chemical and atmospheric agents.The lid of the enclosure,is retained by four self-tapping screws and are sealed to IP56 with a neoprene gasket.
Fitted in the bottom half of the enclosure is a 3-way terminal connector used for connecting the armoured cable and one 20mm weatherproof cable gland which will accommodate a cable from 6 to 12mm in diameter.
The product is fully wired with 10,15 or 20 meters of 3 core 1.5mm SWA cable depending on size of kit and only requires connecting to the Garden Power Kit.
Also the product can be used in conjunction with our full range of switch boxes which then can be used for controlling water pumps and UV filters etc.

Colour Codes Used.
Grey=Earth----(E)----With yellow and green sleeving on.
Black=Neutral-(N)----With Blue sleeving on.
Brown=Live----(L)----Brown.

This product can also be permanently connected to the house supply through a spur or directly connected to the consumer unit for a more professional installation.

PLEASE NOTE !!

If this product is permanently connected to the house supply through a spur or directly connected to the consumer unit the installation should only be carried out by a electrical contractor who is registered under part P self-certification scheme.If the installation is not carried out by a competent electrician who is registered under part P self-certification scheme then you must notify the local Building Control Department bofore work begins.
For further information contact your local authority's Building Control Department.Visit the National inspection Council for Electrical Installation's web site at www.niceic.org.uk/ to find a qualified electrician. 

SPECIFICATION:

Supply voltage:----220 to 240Vac 50-60 Hz.
Environment:-------Temp.range -10 to+50c sealed to IP56.(box)
Do not install when temp.is below 0-c.
BASEC 1.5mm approved 3 core SWA-(Harmonised core colours)
Temp.limits -15 to 90c.(SWA)
 

Armoured Cable adaptor box £14.40		Cable cleats pack 50, Size 5 £6.00
Weatherproof Junction Box £14.40

Prices include VAT and exclude delivery unless otherwise stated.